S&T Machine Tools Pvt Limited
Singanallur, Coimbatore, Tamil Nadu
GST No. 33AAXCS7872C1ZU
08046032260 80% Response Rate
Send E-mail
- Home
- »
- Our Products
- »
- All Geared Lathe
| Height of Centre | 400 mm |
| Swing Over Bed | 800 mm |
| Spindle Bore | 82 mm |
| Machine Type | All Geared Heavy Duty Lathe Machine |
| Bed Width | 510 mm |
| Distance Between Centre | 2000/3000 mm |
| Swing Over Cross Slide | 560 mm |
| Maximum Swing in Gap | 1000 mm |
| Cross Slide Travel | 320 mm |
| Spindle Speed Range | 8-1400 RPM |
| Motor Power | 7.5 kW |
| Machine Condition | New |
| Country of Origin | Made in India |
| Top Slide Travel | 145 mm |
| Diameter of Tailstock sleeve | 90 mm |
| Travel of Tailstock sleeve | 150 mm |
| Model | ETM 800 |
Special Features:
The Guide ways and all gears in the head stock are hardened and precision ground.
Machines are with Powerful head stock gear train and rigid spindle for high accuracy.
Feed rod and lead screw interlocked.
Easy operating Speed change levers.
Cam Lock spindle nose
Need not change gears you can turn all the metric and inch thread indicated in chart.
An over load safety device is provided on the apron.
With foot brake, coolant system, Chuck guard as STD Accessories.
Head Stock with Compulsory lubrication system.
Spindle with mechanical clutch
Big Spindle bore.
Hardened and ground Guide ways.
| Height of Centre | 330 mm |
| Swing Over Bed | 660 mm |
| Spindle Bore | 105 mm |
| Machine Type | All Geared Heavy Duty Lathe Machine |
| Bed Width | 405 mm |
| Number of Spindle Speeds | 12 |
| Distance Between Centre | 1000/1500/2000/3000 mm |
| Swing Over Cross Slide | 420 mm |
| Maximum Swing in Gap | 870 mm |
| Cross Slide Travel | 360 mm |
| Spindle Speed Range | 36-1600 RPM |
| Tail Stock Spindle Taper Bore | MT 7 |
| Motor Power | 7.5 kW |
| Machine Condition | New |
| Country of Origin | Made in India |
| Taper Of Spindle Bore | MT7 |
| Diameter of Tailstock Sleeve | 75 mm |
| Travel of Tailstock Sleeve | 150 mm |
| Length In Gap | 220 mm |
| Spindle Nose | D1-8 |
Special Features:
The Guide ways and all gears in the head stock are hardened and precision ground.
Machines are with Powerful head stock gear train and rigid spindle for high accuracy.
Feed rod and lead screw interlocked.
Easy operating Speed change levers.
Cam Lock spindle nose
Need not change gears you can turn all the metric and inch thread indicated in chart.
An over load safety device is provided on the apron.
With foot brake, coolant system, Chuck guard as STD Accessories.
Head Stock with Compulsory lubrication system.
Spindle with mechanical clutch
Big Spindle bore.
Hardened and ground Guide ways.
| Height of Centre | 255 mm |
| Swing Over Bed | 510 mm |
| Spindle Bore | 80 mm |
| Machine Type | All Geared Heavy Duty Lathe Machine |
| Bed Width | 350 mm |
| Number of Spindle Speeds | 12 |
| Distance Between Centre | 1500/2000/3000 mm |
| Swing Over Cross Slide | 305 mm |
| Maximum Swing in Gap | 735 mm |
| Spindle Speed Range | 25-1600 RPM |
| Motor Power | 10 HP |
| Machine Condition | New |
| Country of Origin | Made in India |
| Spindle Nose | D1-8 |
| Taper of Spindle Bore | MT7 |
| Top Slide Travel | 130 mm |
| Metric Thread Range | 0.2 - 14 mm |
| Diameter of Tail Stock Sleeve | 75 mm |
| Travel of Tail Stock | 180 mm |
| Overall Dimension | 4400 x 1120 x 1430 mm |
Special Features:
The Guide ways and all gears in the head stock are hardened and precision ground.
Machines are with Powerful head stock gear train and rigid spindle for high accuracy.
Feed rod and lead screw interlocked.
Easy operating Speed change levers.
Cam Lock spindle nose
Need not change gears you can turn all the metric and inch thread indicated in chart.
An over load safety device is provided on the apron.
With foot brake, coolant system, Chuck guard as STD Accessories.
Head Stock with Compulsory lubrication system.
Spindle with mechanical clutch
Big Spindle bore.
Hardened and ground Guide ways.
*Your information is safe with us.
| Height of Centre | 205 mm |
| Swing Over Bed | 410 mm |
| Spindle Bore | 52 mm |
| Machine Type | All Geared Heavy Duty Lathe Machine |
| Bed Width | 250 mm |
| Number of Spindle Speeds | 16 |
| Distance Between Centre | 1000/1500 mm |
| Swing Over Cross Slide | 255 mm |
| Maximum Swing in Gap | 580 mm |
| Cross Slide Travel | 210 mm |
| Spindle Speed Range | 45-1800 RPM |
| Tail Stock Spindle Taper Bore | MT-5 |
| Motor Power | 2.3 kW |
| Machine Weight | 1800 KG |
| Machine Condition | New |
| Country of Origin | Made in India |
| Length In Gap | 245 mm |
| Spindle Nose | D1-6 |
| Top Slide Travel | 140 mm |
| Model | ETM 410 |
Special Features:
The Guide ways and all gears in the head stock are hardened and precision ground.
Machines are with Powerful head stock gear train and rigid spindle for high accuracy.
Feed rod and lead screw interlocked.
Easy operating Speed change levers.
Cam Lock spindle nose
Need not change gears you can turn all the metric and inch thread indicated in chart.
An over load safety device is provided on the apron.
With foot brake, coolant system, Chuck guard as STD Accessories.
Head Stock with Compulsory lubrication system.
Spindle with mechanical clutch
Big Spindle bore.
Hardened and ground Guide ways.
| Height of Centre | 178 mm |
| Swing Over Bed | 356 mm |
| Spindle Bore | 38 mm |
| Machine Type | All Geared Heavy Duty Lathe Machine |
| Bed Width | 206 mm |
| Number of Spindle Speeds | 16 |
| Distance Between Centre | 1000 mm |
| Swing Over Cross Slide | 215 mm |
| Maximum Swing in Gap | 540 mm |
| Cross Slide Travel | 185 mm |
| Spindle Speed Range | 45-1800 RPM |
| Tail Stock Spindle Diameter | 45 mm |
| Tail Stock Spindle Taper Bore | MT-5 |
| Motor Power | 2.2 kW |
| Machine Weight | 800 Kg |
| Machine Condition | New |
| Length In Gap | 145 mm |
| Spindle Nose | D1-4 |
| Top Slide Travel | 92 mm |
Special Features:
The Guide ways and all gears in the head stock are hardened and precision ground.
Machines are with Powerful head stock gear train and rigid spindle for high accuracy.
Feed rod and lead screw interlocked.
Easy operating Speed change levers.
Cam Lock spindle nose
Need not change gears you can turn all the metric and inch thread indicated in chart.
An over load safety device is provided on the apron.
With foot brake, coolant system, Chuck guard as STD Accessories.
Head Stock with Compulsory lubrication system.
Spindle with mechanical clutch
Big Spindle bore.
Hardened and ground Guide ways.
| Power | 3.25/4hp |
Special Features:
The Guide ways and all gears in the head stock are hardened and precision ground.
Machines are with Powerful head stock gear train and rigid spindle for high accuracy.
Feed rod and lead screw interlocked.
Easy operating Speed change levers.
Cam Lock spindle nose
Need not change gears you can turn all the metric and inch thread indicated in chart.
An over load safety device is provided on the apron.
With foot brake, coolant system, Chuck guard as STD Accessories.
Head Stock with Compulsory lubrication system.
Spindle with mechanical clutch
Big Spindle bore.
Hardened and ground Guide ways.
*Your information is safe with us.
| Height of Centre | 230 mm |
| Swing Over Bed | 460 mm |
| Spindle Bore | 58 mm |
| Machine Type | All Geared Heavy Duty Lathe Machine |
| Bed Width | 300 mm |
| Number of Spindle Speeds | 12 |
| Distance Between Centre | 1000/1500/2000 mm |
| Swing Over Cross Slide | 270 mm |
| Maximum Swing in Gap | 690 mm |
| Cross Slide Travel | 285 mm |
| Spindle Speed Range | 25-2000 RPM |
| Tail Stock Spindle Taper Bore | MT-6 |
| Motor Power | 3 HP |
| Machine Weight | 2120 Kg |
| Country of Origin | Made in India |
| Length In Gap | 165 mm |
Special Features:
The Guide ways and all gears in the head stock are hardened and precision ground.
Machines are with Powerful head stock gear train and rigid spindle for high accuracy.
Feed rod and lead screw interlocked.
Easy operating Speed change levers.
Cam Lock spindle nose
Need not change gears you can turn all the metric and inch thread indicated in chart.
An over load safety device is provided on the apron.
With foot brake, coolant system, Chuck guard as STD Accessories.
Head Stock with Compulsory lubrication system.
Spindle with mechanical clutch
Big Spindle bore.
Hardened and ground Guide ways.
| Height of Centre | 280 mm |
| Swing Over Bed | 560 mm |
| Spindle Bore | 80 mm |
| Bed Width | 350 mm |
| Number of Spindle Speeds | 12 |
| Distance Between Centre | 1500/2000/3000 mm |
| Swing Over Cross Slide | 355 mm |
| Maximum Swing in Gap | 785 mm |
| Cross Slide Travel | 326 mm |
| Spindle Speed Range | 25-1600 RPM |
| Motor Power | 10 HP |
| Machine Condition | New |
| Country of Origin | Made in India |
| Length In Gap | 200 mm |
Special Features:
The Guide ways and all gears in the head stock are hardened and precision ground.
Machines are with Powerful head stock gear train and rigid spindle for high accuracy.
Feed rod and lead screw interlocked.
Easy operating Speed change levers.
Cam Lock spindle nose
Need not change gears you can turn all the metric and inch thread indicated in chart.
An over load safety device is provided on the apron.
With foot brake, coolant system, Chuck guard as STD Accessories.
Head Stock with Compulsory lubrication system.
Spindle with mechanical clutch
Big Spindle bore.
Hardened and ground Guide ways.
4.2/5
Reviewed by 25 Users
Most Relevant Reviews